Piezoelectric Accelerometer ENDEVCO MODEL 6237M70/ Model 6237M70/M71 • +1200°F (+650°C) Operation • Integral Hardline Cable • Single Bolt Mount • Ground Isolated • Gas Turbine Testing DESCRIPTION The ENDEVCO® Model 6237M70 and 6237M71 piezoelectric accelerometers are designed specifically for use in extremely high temperature environments
such as those experienced on aircraft gas turbines.
These accelerometers are designed for continuous
operation at +1200°F with long Mean Time
Between Failure (MTBF). The small size and light
weight of these accelerometers permit installation in
cramped locations with minimal structural support. The accelerometer is a self-generating device thatrequires no external power source for operation.
Models 6237M70/M71 incorporate ENDEVCO’s
PIEZITE® Type P-15 crystal in a shear design. The
6237M70 and 6237M71 differ in their internal
design and in the direction of the sensitive axis. The
6237M70 has its sensitive axis located in line withthe mounting screw, while the 6237M71 is orientedperpendicular, or transverse, to the mounting screw.
The sensing elements and integral shield are isolated
from the case. These accelerometers feature an
integral hardline cable with a standard length of 120
inches. Other cable lengths are also available on
ENDEVCO Signal Conditioner Model 2721B is
recommended for use with this high impedance
TYPICAL AMPLITUDE RESPONSE TYPICAL AMPLITUDE RESPONSE TYPICAL TEMPERATURE RESPONSE TYPICAL TEMPERATURE RESPONSE Piezoelectric Accelerometer SPECIFICATIONS 6237M70/
The following performance specifications conform to ISA-RP-37.2 (1964) and are typical values, referenced at +75°F (+24°C) and 100 Hz, unlessotherwise noted. Calibration data, traceable to National Institute of Standards and Technology (NIST), is supplied. DYNAMIC CHARACTERISTICS ELECTRICAL CHARACTERISTICS OUTPUT POLARITY
Acceleration directed into base of unit produces positive output at center socket of receptacle
Two places at +1200°F (+650°C)CAPACITANCETRANSDUCER (Excluding cable)
Center conductor to inner shieldGROUNDING
ENVIRONMENTAL CHARACTERISTICS TEMPERATURE RANGE TRANSDUCER/HARDLINE CABLE [5]
Open to environment via vent hole in splash protected area
PHYSICAL CHARACTERISTICS DIMENSIONS
Triaxial, 0.095 inch diameter, Inconel jacketed, mineral oxide insulated
Coaxial receptacle with 10-32 UNF threads designed to mate with ENDEVCO 3000 Series Cable Assembly or equivalent. Receptacle must be handled with care
CALIBRATION SUPPLIED: CHARGE SENSITIVITY ACCESSORY
sients of greater than +100°F (+38°C) per minute.
4. The electrical resistance of piezoelectric materials decreases with
an increase in temperature and can approach 10 000Ω at
OPTIONAL
5. For cable lengths of less than 12 inches (0.30 m), the maximum
operating temperature is +500°F (+260°C). The temperature
charge deviation at +500°F (+260°C) is typically +8%.
1. Frequency response is controlled by the resonance character-
6. Maintain high levels of precision and accuracy using Endevco's
istics of the transducer. Estimated calibration errors are ±1.5%
factory calibration services. Call Endevco’s inside sales force at
to 900 Hz and 2.5% from 900 Hz to 5000 Hz.
800-982-6732 for recommended intervals, pricing and turn-around
2. Low-end response of the transducer is a function of its
time for these services as well as for quotations on our standard
3. Spurious high frequency discharge may be exhibited by this
device for several minutes after exposure to temperature tran-
Continued product improvement necessitates that Endevco reserve the right to modify these specifications without notice. Endevco maintains a program of con-stant surveillance over all products to ensure a high level of reliability. This program includes attention to reliability factors during product design, the support ofstringent Quality Control requirements, and compulsory corrective action procedures. These measures, together with conservative specifications have made thename Endevco synonymous with reliability.
ENDEVCO CORPORATION, 30700 RANCHO VIEJO ROAD, SAN JUAN CAPISTRANO, CA 92675 USA (800) 982-6732 (949) 493-8181 fax (949) 661-7231
M. Votava · M. Krsˇiak · J. Podhorná · K.A. Miczek Alprazolam withdrawal and tolerance measured in the social conflict test in mice Abstract Rationale: It is difficult to assess withdrawal locomotion while aggression tended to be increased. from benzodiazepines, and preclinical assessment of be- Conclusions: Tolerance to the alprazolam effects on ag-haviour during social conflict
OFFICE OF THE DIRECTOR GENERAL OF CIVIL AVIATION TECHNICAL CENTRE, OPP SAFDURJUNG AIRPORT, NEW DELHI CIVIL AVIATION REQUIREMENTS SECTION-5 AIR SAFETY SERIES 'F’ PART III ISSUE I, DATED 13th November 2009 SUBJECT : - PROCEDURE FOR MEDICAL EXAMINATION OF CREW FOR ALCOHOL CONSUMPTION INTRODUCTION It is known that even when the blood alcohol levels are zero, there could be some
Piezoelectric Accelerometer