Stc_0706web

Thank you for purchasing this StrokeCoach Rowing System. We have designed the
StrokeCoach to provide you with all the basic information you need to train effectively –
elapsed time, stroke rate and stroke count as well as 25 minutes of stroke rate memory so you
can review your rates after a race or piece.
Your StrokeCoach should provide you with years of trouble-free service but we are alwayshere to help if a problem arises. To order parts or accessories or obtain technical support,please call 610-447-1555. You may also e-mail orders to [email protected] and send Operating Manual
questions to our support representatives at [email protected]. Visit us on the web at:www.nkhome.com.
NK Rowing Electronics Warranty & Service
NK does not believe in "disposable electronics." We know our products don't lead a pamperedlife, and we design them for years of performance in tough conditions. We guarantee every NKproduct to be free of defects in materials and workmanship for a period of TWO YEARS fromyour date of purchase. We will repair or replace any defective product or part when notifiedwithin the warranty period, and will return the product via domestic ground shipping at nocharge. The following issues do not result from a manufacturing defect and are not coveredunder this warranty: damage due to improper use or neglect, including corrosion; impact NIELSEN-KELLERMAN
damage; modifications or attempted repairs by someone other than an authorized NK repair agent; normal wear and tear; failed batteries.
NK wants you to be an NK customer for life, so we take care of you even beyond the terms of the normal product warranty with our Customer Care Program. Trade in any NK display unit, no matter the age or condition, and receive a generous discount on the replacement product.
OPERATION
Start:
Memory:
Mounting:
On:
Off:
The Control unit willturn itself off after Stop:
Reset/Ready:
work. NOTE: Once you have “stopped” the clock, you cannot set it to “READY” or restart until you have cleared/reset. Changing the Battery:
Resetting after Changing the Battery:
MAINTENANCE
Storage:
Carry Strap:
3-Volt CR2032 lithiumwatch battery, “+” poleup, and replace thebattery door.
Cleaning:
Make sure the blacko-ring seal is in place TROUBLESHOOTING
TROUBLESHOOTING, CONT.
PROBLEM:
POSSIBLE SOLUTION:
PROBLEM:
POSSIBLE SOLUTION:
NO STROKE RATE
The display unit may not be in contact with the DISPLAY APPEARS FAINT,
Replace your battery (CR2032 Lithium watch battery), mounting bracket. Push the display unit firmly onto following the instructions on page 10. In rare cases, DISPLAY SUDDENLY
the mounting bracket until a loud ‘click’ is heard.
an electrostatic discharge (static electricity “shock”) GOES BLANK,
may cause your display’s unit to go blank. In dry The seat magnet may not be passing close enough to weather, a charge can build up while the unit is being the stroke rate sensor. Make sure that the magnet is UNIT WILL NOT TURN ON
carried in the storage pouch or a pocket and be passing directly over the black sensor and within 3/4".
discharged when the unit is touched or placed on The magnet and stroke rate sensor may not be the mounting bracket. If this happens, you can correctly aligned. Make sure that the magnet and perform a complete reset of your unit as follows: black sensor are both across (perpendicular to) the Open the battery door and remove the battery. Leave the battery out for at least 10 seconds while pressing If possible, swap your control unit with a control unit and holding the button. Release the button and reinstall you know works. If the stroke rate begins working, the battery. The unit should turn on and function your problem lies with your control unit. If the stroke rate still does not work, your problem lies with your If this procedure does not solve the problem, and mounting bracket, stroke rate sensor or magnet.
your unit is more than 2 years old, try replacing the battery.
TIMER WILL
The unit is in STOP or MEMORY mode. Hold the NOT START
button for two seconds to reset the unit and clear “STOP”.
The unit may not be receiving a “start” signal from thestroke rate sensor. Review “no stroke rate” solutions above.

Source: http://www.rowing-shop.hr/upload_data/site_files/stc_0706web.pdf