Microsoft word - hd7936c tech data

TECHNICAL DATA- HD-36C/7936C
LITHIUM BASED CONCRETE DENISIFIER CONCENTRATE

PRODUCT DESCRIPTION:
HD36C is a premium lithium silicate sealer/densifier for concrete surfaces. HD36C deeply penetrates and reacts with cured concrete.
This reaction produces a calcium silicate hydrate within the concrete pores. Treated surfaces will remain breathable, reduce porosity,
reduce dusting, reduce water permeability and increase abrasion resistance. When properly applied, HD36C will not leave the whitish
blush characteristic of sodium silicate products.
Features and Benefits:
FINISH CHARACTERISTICS:
Reduce application costs with one step application on broom Normally, this product does not change the overall appearance of the or power trowelled finishes. Achieve architectural finishes, substrate. After the material is applied and allowed to dry for 24 hours, does not contribute to Alkali Surface Reaction (ASR), Will it will not be readily apparent that the application has occurred, except not leave a white surface as compared to other silicate the concrete will be fortified and strengthened. products. Reduce dusting, porosity, water permeability and radon mitigation. Improves abrasion resistance, light ABRASION RESISTANCE:
reflectance and gloss. Deeper penetrating then conventional The application of this product will increase the abrasion resistance of silicates. Can be used interior and exterior. Fast curing. Ready most substrates. Results will vary according to substrate type. for traffic in one hour for most floors. Breathable . ADHESION:
VOLATILE ORGANIC CONTENT:
Because this material becomes an integral part of the surface that is treated and does not form an impermeable barrier, delaminations do not DOT CLASSIFICATION:
RECOMMENDED FILM THICKNESS:
VISCOSITY:
Apply until surface is saturated without puddles. Can be applied by any suitable method such as spraying or mopping etc. COVERAGE PER GALLON:
CURE SCHEDULE: (70°)
Coverage rates will vary with concrete porosity. Allow the material to dry for a 24 hour period of time to obtain the Fresh, Uncured, Burnished Concrete….800-1000ft2/gal maximum benefits of the application. This allows the material to react Existing Steel Trowelled Concrete……….400-500ft2/gal. with the concrete and become an integral part of the substrate. Existing Float Finished Concrete .250-350ft2/gal. APPLICATION TEMPERATURE:
PACKAGING INFORMATION:
55-90 degrees F. *When properly used, this product can reduce water This product is available in (1) quart containers. absorption while still maintaining greater than 50% breathability. It is concentrated and should be mixed 1:3 with water, creating a None required. If applying multiple coats, a wet edge should be SHELF LIFE:
One year in unopened containers when stored between 50-80 degrees TOPCOAT:
None required. Multiple coats of this product are compatible
1) PRODUCT STORAGE: Store product in an area so as to bring the material to normal room temperature before using.
Continuous storage should be between 50 and 80 degree F. Keep from freezing.
2) SURFACE PREPARATION: All dirt, oil, dust, foreign contaminants and laitance must be removed to assure a trouble free
application. The substrate can be damp prior to application but there should be no standing water or puddles.
3) PRODUCT APPLICATION: Stir material before using. Apply material to the horizontal surface without thinning with a
brush, mop or spraying equipment. When applying the material, always maintain a wet edge as this will reduce any chance of
water spotting. When spraying, this product can damage vegetation, stain or etch glass, aluminum, metal and plastic.
4) RECOAT OR TOPCOATING: Normally one coat is all that is required. It is best to make a second pass when desired
while the substrate is still wet. Avoid overlapping wet to dry as this can cause water spotting because the product will not be
able to penetrate a dry area that was treated as well as in an area that has been treated but not yet dried.
5) CLEANUP: Use any suitable mild detergent with a neutral pH to slightly alkaline pH and water.
6) FLOOR CLEANING: Caution! Although very unlikely, some cleaners may affect the color of the treated surface. Test
each cleaner in a small area, utilizing your cleaning technique. If no ill effects are noted, you can continue to clean with the
product and process tested.
7) RESTRICTIONS: Restrict the use of the floor to light traffic and non-harsh chemicals 24 hours has passed. Keep the floor
dry for this period (excluding the application of the product and rinsing.)
NOTICE TO BUYER: DISCLAIMER OF WARRANTIES AND LIMITATIONS ON OUR LIABILITY We warrant that our products are manufactured to strict quality assurance specifications and that the information
supplied by us is accurate to the best of our knowledge. Such information supplied about our products is not a
representation or a warranty. It is supplied on the condition that you shall make your own tests to determine the
suitability of our product for your particular purpose. Listed physical properties are typical and should not be
construed as specifications. NO WARRANTY IS MADE, EXPRESSED OR IMPLIED, REGARDING SUCH
OTHER INFORMATION, THE DATA ON WHICH IT IS BASED, OR THE RESULTS YOU WILL OBTAIN
FROM ITS USE. N0 WARRANTY IS MADE, EXPRESSED OR IMPLIED, THAT OUR PRODUCT SHALL
BE MERCHANTABLE OR THAT OUR PRODUCT SHALL BE FIT FOR ANY PARTICULAR PURPOSE.
NO WARRANTY IS MADE THAT THE USE OF SUCH INFORMATION OR OUR PRODUCT WILL NOT
INFRINGE UPON ANY PATENT. We shall have no liability for incidental or consequential damages, direct or
indirect. Our liability is limited to the net selling price of our product or the replacement of our product, at our
option. Acceptance of delivery of our product means that you have accepted the terms of this warranty whether or
not purchase orders or other documents state terms that vary from this warranty. No representative is authorized to
make any representation or warranty or assume any other liability on our behalf with any sale of our products. Our
products contain chemicals that may CAUSE SERIOUS PHYSICAL INJURY. BEFORE USING, READ THE
MATERIAL SAFETY DATA SHEET AND FOLLOW ALL PRECAUTIONS TO PREVENT BODILY HARM.

COPYRIGHT 2/5/06 Legacy Industrial., A Clean Seal LLC Company

Source: http://legacyindustrial.net/images/HD7936C%20Tech%20Data.pdf